![](http://www.cowonglobal.com/images/board/firm/d2/4_58/a3_img_title_02.gif) |
Please uncompress the file. You will
get 3 folders: 0,1, and2. |
|
|
|
|
![](http://www.cowonglobal.com/images/board/firm/d2/4_58/a3_img_title_03.gif) |
Connect COWON D2 to your PC via the
USB cable. |
|
|
|
![](http://www.cowonglobal.com/images/board/firm/d2/4_58/a3_firmware_05.jpg) |
|
|
![](http://www.cowonglobal.com/images/board/firm/d2/4_58/a3_img_title_04.gif) |
When connection is made, please copy
D2_bin Located under the folder labeled "0"into
the root directory of the cowon D2 |
|
![](http://www.cowonglobal.com/images/board/firm/d2/4_58/a3_img_photo_07.gif) |
|
|
![](http://www.cowonglobal.com/images/board/firm/d2/4_58/a3_img_title_05.gif) |
Disconnect the COWON D2 from the
PC. It should fully power off once this is done. |
|
Power on the unit for the firmware
upgrade to process. After the firmware upgrade has
completed it will |
|
automatically shut off. Connect the
unit to the pc again to start the next layer of
the firmware upgrade. |
|
![](http://www.cowonglobal.com/images/board/firm/d2/4_58/firmware_1_07.gif) |
|
- You might
see the white screen on D2; however , it could happen
during firmware upgrade. |
|
|
![](http://www.cowonglobal.com/images/board/firm/d2/4_58/a3_img_title_06.gif) |
When connection is made, please copy
D2.bin under the folder labeled
"1" into the root directory of the Cowon
D2 |
|
![](http://www.cowonglobal.com/images/board/firm/d2/4_58/a3_img_photo_07.gif) |
|
|
![](http://www.cowonglobal.com/images/board/firm/d2/4_58/a3_img_title_07.gif) |
Disconnect the COWON D2 from the
PC. It should fully power off once this is done. |
|
Power on the unit for the firmware
upgrade to process. After the firmware upgrade has
completed it will |
|
automatically shut off. Connect the
unit to the pc again to start the next layer of
the firmware upgrade. |
|
![](http://www.cowonglobal.com/images/board/firm/d2/4_58/firmware_1_07.gif) |
|
- You might
see the white screen on D2; however , it could happen
during firmware upgrade. |
|
|
![](http://www.cowonglobal.com/images/board/firm/d2/4_58/a3_img_title_08.gif) |
When connection is made, please copy
D2_rs.bin and D2_font.bin
located under the folder labeled "2" into
the root directory of the Cowon D2 |
|
![](http://www.cowonglobal.com/images/board/firm/d2/4_58/firmware_1_10.gif) |
|
|
![](http://www.cowonglobal.com/images/board/firm/d2/4_58/a3_img_title_09.gif) |
Disconnect the COWON D2 from the
PC. It should fully power off once this is done. |
|
Power on the unit for the firmware
upgrade to process. After the firmware upgrade has
completed it will |
|
automatically shut off. |
|
![](http://www.cowonglobal.com/images/board/firm/d2/4_58/firmware_1_11.gif) |
|
- You might
see the white screen on D2; however , it could happen
during firmware upgrade. |
|
|
![](http://www.cowonglobal.com/images/board/firm/d2/4_58/a3_img_title_10.gif) |
Make sure that COWON D2 is turned
off, and then turn it again. |
|
|
![](http://www.cowonglobal.com/images/board/firm/d2/4_58/a3_img_title_11.gif) |
The version of firmware is appeared
on the LCD when turning the device on. |
|
Or go to Setting - > Information
to check the version of firmware. |
|
|